Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
-
Do not use the suction hose as
a pressure pipeline.
1. Remove the cover caps (1/3)
from the device.
2. Attach the prefilter with reflow
stopper (15) to the connector
prefilter (16) at the suction hose
(14). Both piecese marked with
B
a
.
3. Attach the adapter (11) to the
water inlet (2) . Both pieces
marked with an
4.
Attach the suction hose connec-
tion water inlet (13) with the seal
ring (12) to the adaptor (11).
Both pieces marked with an
. Fit the water inlet free from air.
5.
Fit a pressure hose to the water
outlet (4) Fit the water outlet
free from air.
Air in the suction hose will stop the
garden pump from working prop-
erly.
Filling the pump
Fill up the garden pump every time before
you start using it. This will ensure an im-
mediate start. Running dry will destroy the
pump.
1. Open the filling screw (
garden pump.
2. Fill with water to the fill point and
retighten the filling screw (
Checks before initional
operation
.
A
A
Switching ON and OFF
1. Connect the power cable (
2. Switching On:
3. Switching Off:
9) on the
9).
•
Check that the electrical con-
nection is 230V ~50Hz
•
Check the proper status of the
electrical plug socket and make
sure that the plug socket is suf-
ficiently fused (at least 10 A).
•
Make sure that moisture or wa-
ter never come in contact with
the mains connection.
There is a risk of electrocution.
•
Control the suction hose. The
end of the suction hose must be
placed in water.
•
Control the suction hose. The
end of the suction hose must be
in outlet position.
The device is not suitable to be
connected to a drinking water sup-
ply system.
power supply.
On/Off Switch (
5) In position "I"
After a suction period the pump be-
gins the supply of water.
On/Off Switch (
5) In position "0"
Overload protection:
of overload the equipment auto-
matically switches off. To restart,
allow the equipment to cool then
switch it back on.
GB
6) to the
In the event
19
Publicité
