Publicité
Les langues disponibles
Les langues disponibles
E) Encoding bit rate (by remote handset)
You can select the desired bit rate during encoding, the higher bit rate will generate better sound quality and
occupy more space of memory. The selectable range is from 32 / 64 /96 /128 / 192 / 256 kbps respectively
•
Set in " Phono " function (3) & remain stop mode.
•
Press the " Info " button at remote handset and the LCD display (2) will show the default bit rate (128
kbps)
•
Press skip or buttons (16,17) to select the desire bit rate for encoding.
•
Press again the " info " to confirm the setting and the LCD display (2) will resume to " Phono " mode
F) Track separation (by remote handset)
You can divide the recording music from Phono or tape to USB/SD track by trace during encoding. Every
time when press the " TS " (track separation) button once at remote handset during encoding from Phono
or tape to USB/SD, the system will generate a new track and continuous the recording. The text " Phono
" or " Tape " at LCD display (2) will flashing one time, it mean the unit is creating a new track successfully.
A) Single file delete
•
Select at " USB " or " SD " mode.
•
Press and hold the " Info " button for 3 seconds and the LCD display (2) will show (del ---001)
•
Press skip forward or skip backward button to select the file going to delete
•
Press the " Rec " button to enter " YES / NO " mode and then press skip forward or skip backward to
select " YES " or " NO ".
•
Press the " Rec " button again to confirm the setting.
B) All files delete (by remote control)
•
Select at " USB " or " SD " mode.
•
Press and hold the " Info " button for 3 seconds and the LCD display (2) will show (del ---001)
•
Press and hold the " Info " button again and the LCD will show " format / y/n " and flashing. Then press
skip forward or skip backward to select " (YES) " or " (NO) ".
•
Press the " Rec " button again to confirm the setting.
Remarks: All files inside the USB storage media or SD card will be deleted completely after confirming to "
(YES) " mode. Press " Stop " button once at remote handset to quite delete mode
To remove the USB / memory card, turn off the power or switch the function mode to either CD, Tape or
tuner first. For USB port – un-plug it by pulling out the USB socket directly, for memory card –pull out the
SDMMC card straightly without bending.
26
All manuals and user guides at all-guides.com
Delete files
Removing of USB / memory card
Publicité
