Publicité
Les langues disponibles
Les langues disponibles
Song title/folder name search function (by remote handset)
You can search the track by the title/folder name in disc during stop mode:-
•
Press the "Find" button once, then press the "skip up" (or skip down) button (16,17), you can search the
title of each song one by one under alphabet order on LCD display (2), then press the " play/pause/
stop " button (19) to start the playback of the selected track.
•
Press again " Find" button, the folder name is being displayed. Then press the "skip up" (or skip down)
button (16,17) to select the desired folder, and press the " Play/Pause/Stop " button (19) to start the
playback of all tracks inside that selected folder.
Remarks: In case no name had been assigned for the track, " none " or " unknown " is being displayed"
on LCD display (2). The system support English alphabet and numeral only for ID3 text MP3 track format
requirement: MP3 bit rate: 32 kbps~256 kbps.
The performance of playing MP3 disc is various from the quality of recording disc and the method of record-
ing. Furthermore, the searching lead-time for MP3-CD is longer than normal CD due to difference fortmats.
Repeat/Intro/Random mode (by remote control)
Press the Repeat/Intro/Random button before or during playback, a single track, single folder (MP3 file
only) or all the tracks can be played in difference mode as follow:
(1) Repeat current track - (1 a, MP3-CD only) Repeat folder - (2) Repeat all - (3) Intro - (4) Random
Explanation:
•
Repeat: You can listen the desired track or folder repeatedly by this function.
•
Intro: You can listen the beginning (10 seconds) of each track in a CD by this function & saving your time
to search the desire song.
•
Random: You can listen all the tracks or folder in a random order by this function
CD/MP3 disc programming (by remote control)
Up to 32 tacks can be programmed for CD or MP3 file and play in any order. Before use, be sure the system
is at stop mode before programming:
•
Set in CD/USB/SD mode & stop the CD/MP3 disc playback.
•
Press the "Program" button, " PROG " indicator will appear on LCD display (2). Moreover, it will indicate
program no. And digits for track no. To be programmed.
•
Select a desired track by pressing skip or buttons (16,17).
•
Press the " Program" button to store the trace into memory.
•
Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
•
When all the desired tracks have been programmed, press CD " Play/Pause/Stop" button (19) to play
the disc in assigned order.
•
To cancel the programmed file, press "stop" button on remote handset until " Prog " indicator is disap-
pear on LCD display (2)
All manuals and user guides at all-guides.com
21
Publicité
