Publicité
Les langues disponibles
Les langues disponibles
•
Connect the power cord (31) to ac outlet.
•
Turn on the power (5) until the LCD display (2) with blue backlight on.
•
Then switch the function selector (3) to "Tuner" function. If sound is coming out from the speaker, it's
mean the power supply is normal. Now your system is ready to play the music.
Manual tuning
•
Select the desired band by radio band selector (12) (fm or fm-stereo).
•
Tune to the required station by turning the tuning knob (14).
•
Adjust volume knob (5) to the desire volume level.
FM & FM-stereo reception
•
Set the radio band selector (12) at "FM" position. Programs are received in mono mode. In particular
when stereo signal are weak. It is preferable to receive the program in mono.
•
Set the radio band selector (12) at "FM-St" position for receiving stereo programs. The fm-stereo led
indicator (13) will light up to show fm stereo program is receiving.
The receiver has a built-in fm wire antenna (27) hanging at the rear cabinet. This wire should be totally un-
raveled and extended for best reception.
•
Switch the Function selector (3) to select " CD/USB/SD " mode.
•
Press "Open/Close" button (18) to open the CD door (10).
•
Place a CD with the printed side facing up inside the tray & then close the CD door.
•
Focus search is performing, the LCD display (2) will show the total number of tracks & total playing
time.
•
Use the convenient buttons
For MP3 discs
•
Press Folder Up button (6), the folder no. will goes up
•
Press
/
•
When the desired track is being selected, press the " Play/Pause/Stop" button (19) to start playback.
ID3 (track/album title) function (by remote handset): Press the " info " button during playback of MP3
disc, the song title is being displayed. Press the "info" button again to disable the function.
20
All manuals and user guides at all-guides.com
Connection & Initial Use
Operation
,
/
(16,17) button, the track no. change.
Radio
CDs
and
to navigate through your music collection.
Publicité
