GE 25982 Mode D'emploi page 20

Tone/Pulse Dialing
NOTE: This setting may be made only with the base.
1. Press the menu/flash button until 41TONE 2PULSE shows in the display. 1TONE is
the default.
. Press the caller id (9 or :) button or the touch-tone pad to scroll to 1TONE or
2PULSE.
. Press mute/menu to save. You will hear a confirmation tone.
Transfer ON/OFF
NOTE: This setting may only be made with the handset.
In order to use the call Transfer feature (applicable ONLY with additional handsets),
you must have the Transfer ON/OFF set to ON through the menu of each handset.
1. Press the mute/menu button until TRANSFER 4 1OFF shows in the display.
. Use the CALLER ID-VOLUME (6 or 5) button or the touch-tone pad on the handset
to scroll to 2ON.
. Press mute/menu again to save. You will hear a confirmation tone.
Registration (Link Cordless Handset)
NOTE: If a handset become de-registered or inoperative, it may be
necessary to register the cordless handset(s) again.
Registration links the base to a cordless handset. Once a handset is registered it
can use the base's phone connection. A cordless handset will not operate until it is
registered to the base. During the registration process, keep the handset near the base.
1. Press the menu/flash button on the base until LINK HANDSET ? shows in the
display. 2 NO is the default setting.
. Press the 1 number key or press the caller id (9 or :) button on the base to scroll
to 1YES.
. Press menu/flash on the base to confirm handset is linked to the base. WAITING
HANDSET REGISTRATION shows in the display.
4. Press the mute/menu button on the handset until LINK BASE? shows in the display.
NO is the default setting.
5. Press CALLER ID-VOLUME (6 or 5) button on the handset to scroll to YES.
6. Press mute/menu on the handset again to confirm. You will hear a long
confirmation tone when the handset is successfully linked to the base.
0
All manuals and user guides at all-guides.com