Ego Power+ BC3800E Mode D'emploi page 9

This product is in accor-
CE dance with applicable EC
directives.
Waste electrical products
should not be disposed of
WEEE
with household waste. Take
to an authorized recycler.
Guaranteed sound power
level. Noise emission to the
Noise environment according to
XX
the European community's
Directive.
V Volt Voltage
Direct Type or a characteristic of
Current current
No Load
n Rotational speed, at no load
Speed
0
... /min Per Minute Revolutions per minute
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
When using this product, basic safety
precautions should always be followed to reduce the risk
of fire, electric shock, and personal injury, including the
following:
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
DANGER!
Do not rely on the tool's insulation
against electric shock. To reduce the risk of
electrocution, never operate the machine in the vicinity
of any wires or cables (power, etc.) which may carry
electric current.
CAUTION!
Wear appropriate personal hearing
protection during use. Under some conditions and
durations of use, noise from this product may contribute
to hearing loss.
TRAINING
◾
Read the instructions carefully. Be familiar with the
controls and the proper use of the machine.
◾
Never allow people unfamiliar with these instructions
or children to use the machine. Local regulations can
restrict the age of the operator.
◾
Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUCHCUTTER — BC3800E
All manuals and user guides at all-guides.com
PREPARATION
◾
◾
◾
OPERATION
◾
◾
◾
◾
◾
◾
MAINTENANCE AND STORAGE
◾
◾
◾
◾
OTHER SAFETY WARNINGS
◾
◾
◾
◾
Never operate this product while people, especially
children, or pets are nearby.
Wear eye protection and stout shoes at all times while
operating this product.
The distance between the machine and bystanders
shall be at least 15m.
Use the brush cutter only in daylight or good artificial light.
Never operate the brush cutter with damaged guards
or shields or without guards or shields in place.
Switch on the motor only when the hands and feet are
away from the cutting means.
Always disconnect the brush cutter from the power
supply (i.e. remove the plug from the mains or remove
the disabling device).
◾
whenever leaving the brush cutter unattended;
◾
before clearing a blockage;
◾
before checking, cleaning or working on the brush cutter;
◾
after striking a foreign object;
◾
whenever the brush cutter starts vibrating abnormally.
Take care against injury to feet and hands from the
cutting means.
Always ensure that the ventilation openings are kept
clear of debris.
Disconnect the brush cutter from the power supply (i.e.
remove the plug from the mains or remove the disabling
device) before carrying out maintenance or cleaning work.
Use only the manufacturer's recommended replacement
parts and accessories.
Inspect and maintain the brush cutter regularly. Have the
machine repaired only by an authorized repairer.
When not in use, store the brush cutter out of the reach
of children.
Keep children away - All visitors should be kept at
least 100 feet away from work area.
Avoid dangerous environments - Don't use
appliances on damp or wet slope.
Always turn the brush cutter off or remove the
battery pack whenever leaving the tool unattended.
Don't use in rain.
EN
9