Ego Power+ BC3800E Mode D'emploi page 18

EN
PROBLEM
Trimmer head will not
advance line (only
using with trimmer
head).
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.
18
56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUCHCUTTER — BC3800E
All manuals and user guides at all-guides.com
CAUSE SOLUTION
◾
The motor shaft or trimmer head is bound
with grass.
◾
There is not enough line on the spool.
◾
The trimmer head is dirty.
◾
Line is tangled on spool.
◾
The line is too short.
SOLUTION
◾
Stop the machine, remove the
battery and remove the grass from
the motor shaft and trimmer head.
◾
Remove the battery and replace the
cutting line, follow the section "LINE
REPLACEMENT" in this manual.
◾
Remove the battery and clean the
spool, spool retainer and spool base.
◾
Remove the battery, remove the line
from the spool and rewind, follow
the section "LINE REPLACEMENT" in
this manual.
◾
Remove the battery and pull the
lines while alternately pressing
down on and releasing the bumb
knob.