Publicité
Les langues disponibles
Les langues disponibles
OUTLET PROGRAMMING
Outlet banks 1-4 of the Monster Signature AVS 2000 are "switched" outlets. This means the components plugged
into these outlets will only receive power when your Monster Signature AVS 2000 is turned on. These outlets are
also "timed", enabling sequential power activation of components plugged into the switched outlets. Outlets will
not turn on or off until after a short delay. Without sequential turn-on, you'd power all your devices at once, causing
unnecessary electrical stresses known as "turn-on surge." Turn-on surges can overheat system connections, pop circuit
breakers, and degrade overall system performance. By sequentially powering your high power loads, you can prevent
turn-on surges and deliver all the stable voltage needed to maintain peak performance.
The four switched outlets on the Monster Signature AVS 2000 can be individually programmed to delay power-up of
connected components from 1 to 6 seconds. In order to program each outlet, you must use the slide switches.
The Delay Time Multiplier will double the time
selected for that bank when set to x2.
The Delay Time switches select
the delay time for that bank.
Delay time left / Multiplier left
= 1 second delay (1x1=1)
Delay time left / Multiplier right
= 2 second delay (1x2=2)
Delay time right / Multiplier left
= 3 second delay (3x1=3)
Delay time right / Multiplier right
= 6 second delay (3x2=6)
7
Publicité
