Xerox CopyCentre C118 Guide D'installation page 3

Network Connection
Quick Setup Guide
This guide includes instructions for:
■ Navigating Display Screens
■ Network Setup Using DHCP
■ Network Setup Using a Static IP Address
■ Verifying Network Setup Using CentreWare Internet Services (IS)
This setup guide provides instructions for connecting the Xerox WorkCentre M118/M118i on an Ethernet
TCP/IP network. It includes procedures for setting up the network connection using either of the following
methods:
■ DHCP: Use this method to allow a DHCP server to automatically assign an IP address. This is the factory
default setting.
Static IP address: Use this method to manually assign an IP address provided by the network
■
administrator.
Note
The System Administrator Guide provides detailed instructions for setting up a network connection. It also
provides setup procedures if you are using Novell IPX. The System Administrator Guide is located on the
Customer Documentation CD-ROM and on the Xerox website.
Before You Begin
Before turning on the machine:
■ Confirm that an existing operational network utilizing TCP/IP is available.
Confirm that the Ethernet cable is plugged into the machine and is connected to an operational Ethernet
■
port on the network.
Note
The RJ45 Ethernet cable is not supplied by Xerox.
Copyright © 2005, 2004 Xerox Corporation. All rights reserved.
All manuals and user guides at all-guides.com
on page 2
on page 2
on page 3
1
®
Xerox WorkCentre
on page 5
M118/M118i