Grundig TA 5040 Mode D'emploi page 15

OPERATION ______________________________
4 Press the start lever
C
automatically snap into place.
‒ The toasting process begins. The indicator
light of the Cancel button
during the toasting process.
Notes
If the power plug is not connected into the
■
wall socket, the start lever
into place.
The degree of browning can also be adjusted
■
during the toasting process with the browning
control .
D
5
The appliance automatically switches off as
soon as the set degree of browning has been
reached.
The start lever springs back up and the
C
Cancel button light goes off. The toast
E
slices are pushed upwards and can be taken
out of the toaster.
Note
After the start lever
C
■
can use high-lift function by pushing the start
lever upwards.
C
To cancel the toasting process before it has
■
finished, press the Cancel button
lever springs back up and the toast slices
C
can be taken out of the toaster.
Caution
Be very careful when taking the toast slices
■
out of the toaster as the metal parts of the
toaster and also the bread can become very
hot.
6
Disconnect the appliance from the wall
socket.
Toasting frozen bread
1 Follow the steps from 1 to 4 at the Toasting
section.
2
Press the Defrost button
‒ The indicator lights of the defrost button
and Cancel button
toasting process begins.
All manuals and user guides at all-guides.com
down until it
illuminates
E
doesn't snap
C
springs back up, you
. The start
E
.
F
F
illuminate and the
E
Note
When the Defrost button
■
the toasting process takes longer than with
normal toasting.
3 The appliance automatically switches off
as soon as the set degree of browning has
been reached. The start lever
up; Defrost button and the Cancel button
F
lights go off. The toast slices are pushed
E
upwards and can be taken out of the toaster.
Note
After the start lever
C
■
can use high-lift function by pushing the start
lever upwards.
C
To cancel the toasting process before it has
■
finished, press the Cancel button
lever springs back up and the toast slices
C
can be taken out of the toaster.
Caution
Be very careful when taking the toast slices
■
out of the toaster as the metal parts of the
toaster and also the bread can become very
hot.
4
Disconnect the appliance from the wall socket.
Warming up already toasted bread
1
Follow the steps from 1 to 4 at the Toasting
section.
2
Press the Reheat button
‒ The indicator lights of the Reheat button
and Cancel button
warming up process begins.
3
The appliance automatically switches off as
soon as the set degree of warming has been
reached. The start lever
up; Reheat button and the Cancel button
G
lights go off. The toast slices are pushed
E
upwards and can be taken out of the toaster.
Note
After the start lever
C
■
can use high-lift function by pushing the start
lever upwards.
C
is pressed,
F
springs back
C
springs back up, you
. The start
E
.
G
G
illuminate and the
E
springs back
C
springs back up, you
ENGLISH 15