Riello ATRB 120 N Mode D'emploi page 9

− Remove the plug (G) from the pipe (I)
I
G
− Connect the pipe (E) between the expansion vessel (B)
and the pipe (I) using the seals provided in the kit.
9 The safety valve must be connected to a suitable collection
and drain system. The manufacturer declines all responsibility
for damage caused by water escaping from the safety valve.
On completion of the installation, fill the storage cylinder as in-
structed in the corresponding instruction manual.
I
E
B
4 CHECKS
Check the tightness of all joins.
All manuals and user guides at all-guides.com
9