Publicité
Les langues disponibles
Les langues disponibles
Aux encoding
1
Connect the unit to other device by connecting the Aux in jack (24)
2
Set the Function knob (5) to "Phono/Aux" made and then press "Rec" Button(8).
3
The Record LED indicator (12) will light up. Now the system was ready to encoding.
4
Start playback your external device to recording to USB or SD.
5
After finish of recording, press the "Rec" Button(8)again during recording mode.
Track separation (by remote handset)
You can divide the recording music from Phono to USB/SD track by track during encoding. Every time when press
the (Track Separation) Button
tem will generate a new track and continue the Record LED indicator (12) will flashing one time. It mean the unit is
creating a new track successfully.
Track delete (by remote handset)
You can delete the current playback MP3 file from your USB/SD media, just press and hold the delete button on
the remote control during playback the current file, the Play LED indicator (13) will flash once, it means the current
already deleted and system will just to next file and continue playback.
Removing of USB / memory card
To remove the USB/Memory Card, turn off the power or switch the function mode to either Phono or Tuner first.
For USB port -- unplug it by pulling out the USB socket directly. For Memory Card –pull out the SD/MMC card
straightly without bending.
All manuals and user guides at all-guides.com
once at remote handset during encoding from Phono/Aux to USB/SD, the sys-
13
Publicité
