Télécharger Imprimer la page

auna multimedia 10008989 Manuel D'utilisation page 11

Publicité

Les langues disponibles

Les langues disponibles

Remark
As some kind of record the auto-stop area was out of the unit setting, so it will stop before the last track finish. In
this case, select the Auto-Stop Switch (22) to "Off" position. Then it will run to the end of the record but will not stop
automatically.(Turn off the unit by power button or switch back the Auto-Stop Switch (22) to "On" position to stop the
platter rotate). Then put back the tone arm to the rest position. Due to Aux and Phono were designed at the same po-
sition of this system. When Aux in jack(24) plugged by 3.5mm plug. The channel will change to Aux automatically and
turntable will stop to ro- tate. Please ensure the Aux in jack (24) without plugged by anything before playing Phono.
1
Slide the Function knob(5) to Phono/Aux position.
2
Adjust the Power ON-OFF/ Volume Control Knob(16) to desired volume level.
3
Start to play your external device
Playback of MP3-Datein via USB/SD
Connecting
The system is able to decode and playback all MP3 file which stored in the memory media with USB connecting
port or SD.MMC memory card.
1
Turn the Function knob (5) to USB or SD mode
2
Plug-in the USB with the face up and make sure it going into completely or insert
the memory card in the direction of the arrow as shown in the label on the upside
of the memory card slot. Insert straight without bending.
3
Connecting the USB upside down or backwards could damage the audio system or
the storage media (USB thumb drive/SD/MMC Card). Check to be sure the direc-
tion is correct before connecting.
4
The system will start reading and playback the file in the storage media automati-
cally after connecting and the Play LED indicator (13) will light up.
Remark: USB port does not support connection with USB extension cable and is not designed for communicate
with computer directly.
Play / Pause / Stop mode
• To interrupt, press the "Play/Pause/Stop button (10) once, the Play LED indicator (13) will be flashing. Press
again to resume normal playback.
• If press and hold the "Play/Pause/Stop button (10) for two seconds during playback mode. The system will go
to stop mode.
• To start playback again, press the "Play/Pause/Stop" button (10) to start playback, the first track will start play-
back and the Play LED indicator (13) will light up.
Skip/Search mode
• During play or pause mode, if "Skip Up" Button (9) is pressed. It will go to next track and then remain the play
or pause mode.
• During play or pause mode, if "Skip Down" Button (9) is pressed. It will go back to the beginning of the track
and remain the play or pause mode.
• After step 2, press "Skip Down" Button (9) again will go to the previous track and remain the play or pause mode.
• If press and hold the "Skip Up/Down" button (9) during playback, the playing track will go fast forward or back-
ward until the button being released.
All manuals and user guides at all-guides.com
AUX-IN Connection
Playback
11

Publicité

loading