Publicité
Les langues disponibles
Les langues disponibles
Mitsubishi Pajero + Montero
1991 - 2000
Ref. 0257
Fitting instructions
1)
Remove the tail-lights out of the bumper.
2)
Place the tow bar with points (A) against the bottom of the chassis on the screw-thread provided holes.
Points (B) fit the provided holes at the end of the chassis.
The mounting pieces (-e) comes between the chassis and the tow bar.
Place at points (A) the washers and insert the bolts. At point (B) a washer is placed over and under the
chassis, insert a bolt and a nut here and tighten everything firmly.
3)
Reinstall the tail-lights in the bumper.
4)
Install the (*) and also tighten firmly.
Composition
1 tow bar reference 0257
1 flange ball 50T90
2 bolts M16x50
2 safety washers M16
2 nuts M16
1 security shackle 50T
4 bolts M12x1,25x40
2 bolts M12x130
8 washers 40x35x12x4
6 safety washers M12
2 nuts M12
2 mounting pieces (-e)
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(*)
(*)
(A)
(B)
(A-B)
(A-B)
(B)
(A-B)
All bolts and nuts : quality 8.8
Publicité
