Dometic GROUP Waeco PerfectCoffee MC 08 Notice D'emploi page 17

PerfectCoffee MC08
NOTICE!
A
Only install the appliance on surfaces which are heat-resistant and
damp-proof.
You can mount the coffee maker on a wall using the wall bracket (fig. 3,
page 3) or you can use the base plate for a flat surface (fig. 5, page 3).
Mounting on the wall
➤ Mount the wall bracket with two screws, washers and M 4 nuts on a suit-
able wall (fig. 3 A, page 3).
➤ Insert the appliance onto the wall bracket (fig. 3 B, page 3).
The appliance must click into the wall bracket.
Mounting on a surface
➤ Mount the base plate with four round-head bolts, washers and M 3 nuts
on a suitable surface (fig. 5 A, page 3). The diameter of the screw heads
may not exceed 6.5 mm.
➤ Place the coffee maker onto the base plate and screw the coffee maker
down by tightening the knurled screw on the base plate (fig. 5 B,
page 3).
Connecting the coffee maker
➤ Check that the voltage specification on the type plate is the same as that
of the power supply.
➤ Connect the DC plug to a DC socket.
NOTE
I
You can also connect the coffee maker directly to the battery. Ob-
serve the following in the process:
– The connection must be fitted with its own fuse of at least 20 A.
– The connection cable may not exceed a length of 5 m (for 12 V)
or 11 m (for 24 V).
– The cross section must be at least 4 mm².
EN
Installing the coffee maker
17