Technical Description; Control Elements; Installing The Coffee Maker - Dometic GROUP Waeco PerfectCoffee MC 08 Notice D'emploi

Technical description

5 Technical description
The MC08 coffee maker is intended for use in lorries and is connected to a
12 Vg power supply (item no. MC-8-12LX/N) or a 24 Vg power supply (item
no. MC-8-24LX/N), e.g. on-board supply. It can make coffee or tea for up to
eight small cups.
The power supply line must be protected with at least a 20 A fuse.
The filter holder is made of plastic and can be removed for cleaning. The cof-
fee pot can be sealed and is designed as a thermos flask made from stain-
less steel.
The water tank can be removed from above. This makes it easier to fill it with
water.
A drip protection mechanism prevents water flowing out of the filter when the
pot is removed from the appliance before brewing is complete.
The coffee maker switches off automatically when the brewing process is
complete.
5.1

Control elements

The coffee maker has the following control elements:
No. in
fig. 2, page 2
1
2
6

Installing the coffee maker

WARNING!
!
 When selecting the location for installing the appliance, ensure
that passengers cannot be injured under any circumstances.
When installing the appliance, make sure the airbag function is
not impaired.
 Do not attach the appliance in an area where passengers could
knock their heads against it. Make sure there is sufficient space
for the drill head to emerge when drilling.
16
Description
Switch with control lamp
The control lamp lights up red while the coffee is brewing.
Filling level display
PerfectCoffee MC08
EN