Fein Turbo I Mode D'emploi page 4

All manuals and user guides at all-guides.com
3 41 01 116 06 0.book Seite 4 Freitag, 17. Dezember 2010 12:42 12
en
4
Before putting into operation, check the con-
nection and the plug for damage.
Please also observe the operating instructions
and safety warnings of the power tool being
connected to the socket outlet of the vacuum
cleaner.
Extension cord
If the use of an extension cord
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
applicational case, in order to prevent a volt-
age drop in the extension cord, power loss and
overheating of the power tool. Otherwise, the
extension cord and power tool are liable to
electrical danger, and the working efficiency is
impaired.
Recommended dimensions of extension cords
at an operating voltage of 120 V – single-phase
a. c.:
Intended use of the vacuum cleaner.
Wet/dry vacuum cleaner for vacuuming and
extraction of dry, non-hazardous dusts,
minor dust particles, particularly when carry-
ing out dust-forming work with a power tool,
Vakuumcleaner without power tool
Min. conductor size Conductor Size in
2
(A.W.G.) mm
16 14 12 1.5 2.5
Cord Length in Feet Cord Length in Meters
≤ 100 100– ≤ 30
200– 30–
200 300 60
Vakuumcleaner with power tool
Power con- Min. conductor size
sumption (A.W.G.)
10–13 16 14 12
13–18 14 12 –
Cord Length in Feet
≤ 100 100–
200–
200 300
and non-combustible liquids, in weather-pro-
tected environments using the application
tools and accessories recommended by FEIN.
4
60–
100
Conductor Size in
2
mm
1.5 2.5 4
2.5 4 –
Cord Length in Meters
≤ 30
30– 60–
60 100