Fein Turbo I Mode D'emploi page 10

All manuals and user guides at all-guides.com
3 41 01 116 06 0.book Seite 10 Freitag, 17. Dezember 2010 12:42 12
en
10
Switching on and off with a power tool
connected (Figure 8).
Switch the vacuum cleaner off before con-
necting a power tool to the integrated vac-
uum cleaner socket outlet. Make sure that the
power tool is switched off when inserting its
plug into the vacuum cleaner socket outlet.
The vacuum cleaner is automatically switched
on and off via the power tool connected to
the integrated socket outlet.
Plug the plug of the power tool into
the integrated socket outlet.
Set the On/Off switch to ( I ).
Switch the power tool on/off – the
vacuum cleaner automatically starts/
stops.
Regulating the air flow (Figure 9).
The air flow can be increased or decreased
over 5 levels.
To increase the air flow, press the air-
volume regulator to (+).
To decrease the air flow, press the air-
volume regulator to (–).
After switching off a power tool con-
nected to the vacuum cleaner socket
outlet, the vacuum cleaner will run on
for approx. 5 seconds and then automat-
ically switch off.
Fig. 8 Integrated socket outlet
On/Off switch
1.
2.
3.
Fig. 9
Air-flow
regulator