Publicité
Les langues disponibles
Les langues disponibles
User manual
MAINTENANCE & ATTENTION
1.
Please read the installation instructions carefully before use, and operate in strict accordance with this manual sheet.
2.
Because of the high calorific value when projector works, it cannot be installed in flammable explosive place, or the
place that can be touched, in order to avoid accident. If you want to install where can touch easily, need to add partition or warning
board.
3.
Please ensure that all maintenance work is under the condition of power off.
4.
Please clean lens and gobo regularly.
5.
Please regularly check the products operation condition, in order to avoid safety accident caused by the product
problems.
6.
This projector can be used indoor or outdoor, but not in the place such as vibration, dust, moisture, mist, to avoid
causing fire, electric shock, malfunction.
7.
Please do not modify or replace the non-consumable parts voluntarily.
8.
When projector is abnormal, please cut off the power supply immediately. Please ask professional staff to check and
maintain, to avoid fire, falling and hurt.
9.
The power line color:
red (brown) – firing line, blue – zero line, yellow(black) – ground line.
10.
For waterproof model, please pay attention to the front lens cover when you put it back to projector, all the screws
must be tightened, make sure there is no gap between the gasket, the front cover and the projector shell, as shown in below figure.
FOR ANY PROBLEM OR MALFUNCTION, PLEASE CONTACT YOUR RESELLER
www.expelec.fr
33 (0)4.50.60.80.20
X-Star 2K RGB IP
commercial@expelec.fr
167 Rue des peuplier
74330 Epagny Metz-Tessy
France
12
Publicité
