Nicols X-Star 2K RGB IP Manuel D'utilisation page 16

User manual
Menu operation instructions
Menu
R1
G1
B1
Y1
C1
P1
H1
HHH1
HHH2
RGB1
RGB2
A0001
SLAV
Attention
Up and Down key, to change the parameter or DMX address Confirmation, to confirm the present mode
at the next operation.
DMX Mode
Please use only DMX cable and a terminator, no mic cable.
DMX console can't be used in Master-Slave operation (manual mode or auto mode).
There should be only one master unit in Master-Slave operation.
Master/Slave Mode
Choose a unit to function as Master mode, set manual mode or auto mode. The others must be set to
Slave mode. Please, use DMX cable to link the units.
Red laser manual mode, the number shows the current rotation speed
Green laser manual mode, the number shows the current rotation speed
Blue laser manual mode, the number shows the current rotation speed
Yellow laser manual mode, the number shows the current rotation speed
Cyan laser manual mode, the number shows the current rotation speed
Purple laser manual mode, the number shows the current rotation speed
White laser manual mode, the number shows the current rotation speed
White laser fast auto mode with strobe effect
White laser slow auto mode no strobe effect
RGB laser fast auto mode with strobe effect
RGB laser slow auto mode no strobe effect
DMX mode, DXM address range from 1 to 511
Slave mode
Description
X-Star 2K RGB IP
5