Velleman CAMIP10 Notice D'emploi page 8

• Enter your account name and password and click Login. Default, the administrator login is
admin without a password.
Note: use the upper Login button when your browser supports ActiveX Browser Plug-ins. When
using a browser that does not support ActiveX, click on the lower Login button. Some features
e.g. full screen, audio, multi-channel image ... will not be available.
• When login on to the system with an administrator login password, the For Operator screen
opens; login on with a user regular user account will open the For Visitor layout.
Note: when asked for (see title bar), allow the system to run add-in.
For Visitor layout
• The interface software supports up to 9 cameras. The device status shows the status of each of
these 9 cameras. Green = OK, Yellow = camera connection problem, Red = alarm condition.
• Select the preferred screen layout:
cameras simultaneously in the camera display pane.
• Set the preferred colour for the On Screen Display (OSD): disabled (no OSD), black, yellow, red,
white or blue. The OSD shows the name of the camera in the top right corner of the camera
display and a date and time stamp at the bottom.
• When the 'Add timestamp on record' checkbox is checked, date and time are shown on the
recorded file.
Note: set the time via the For Administrator screen (see further).
16.12.2011
CAMIP10
shows 1 camera, shows 4 cameras and
8
shows 9
©Velleman nv