Publicité
Les langues disponibles
Les langues disponibles
1 Preface
EN
Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and
developer of products and solutions for the environ-
mental technology sector. Our innovative products
will filter, clean and recycle in the most demanding of
environments. Nederman's products and solutions will
help you improve your productivity, reduce costs and
also reduce the impact on the environment from in-
dustrial processes.
Read all product documentation and the product iden-
tification plate carefully before installation, use, and
service of this product. Replace documentation imme-
diately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements
of relevant EC directives. To maintain this status, all
installation, maintenance, and repair is to be done
by qualified personnel using only Nederman original
spare parts and accessories. Contact the nearest au-
thorized distributor or Nederman for advice on tech-
nical service and obtaining spare parts. If there are
any damaged or missing parts when the product is de-
livered, notify the carrier and the local Nederman rep-
resentative immediately.
2 Safety
This document contains important information that
is presented either as a warning, caution or note, ac-
cording to the following examples:
WARNING! Risk of personal injury
Warnings indicate a potential hazard to the
health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage
Cautions indicate a potential hazard to the
product but not to personnel, and how that
hazard may be avoided.
10
SB750
NOTE!
Notes contain other information that is import-
ant for personnel.
2.1 General safety instructions
CAUTION! Risk of equipment damage
• Follow the instructions in this manual.
• This machine is only to be used for blasting.
• Do not modify or make any changes to the
machine or its components.
• Do not rebuild the machine or its components
without written permission from the manu-
facturer.
• Do not use other spare parts, than those cor-
responding with the manufacturer's specific-
ations.
• Only use tools and accessories supplied by
the manufacturer.
• The machine must not be used in an explos-
ive environment.
• Always disconnect the supply voltage with
the maintenance switch before any service,
whether mechanical or electrical.
• Always disconnect the compressed air sup-
ply before any service, whether mechanical
or electrical.
3 Description
See
Figure
1.
1
Motor package
2
Eccentric locks
3
Hose connection, suction hose
4 Hose connection, blasting material
5
Connection compressed air
6
Blasting gun
7
Handle
3.1 Electrical diagram
For a wiring diagram with radio filter, see
Figure
2.
Publicité
