Invicon TwinLux Dual Informations Concernant L'utilisation page 9

Charge level indicator (10)
The red LED (10) on the top of the device indicates the battery charge
level of the light unit (see also 3.2).
Note!
Accurate charge level indication
The charge level will be indicated more accurately if you carry out 2 - 3
exposures beforehand.
Exposure time indicator (11)
The green LED (11) on the top of the device indicates the selected
exposure time. The device will automatically switch off after the se-
lected exposure time is up (unless continuous exposure is selected).
Multifunction button Exposure time
action (7)
Short tap 30 seconds
Short press 60 seconds
Long press Continuous exposure
3| Start-up operation
> Place the device on a horizontal surface.
> Connect the power supply unit plug (1) to the power connector.
3.1 Checking the charge level
> Check the battery charge level.
Exposure time
indicator (11)
Fast blinking
Slow blinking
Steady light
9