Invicon TwinLux Dual Informations Concernant L'utilisation page 13

Please observe the following exposure times and distances
Material
®
HyCeram Bond II or Bond THX NF
LuxArt ® Design
®
Luxon Design
Note!
Ensure that all material surfaces are exposed to light carefully.
(Exposure Time, distance).
4.2 Increasing the exposure time during exposure
It is also possible to increase the exposure time by one level during
exposure:
– To increase the exposure time to 60 seconds, when an exposure time
of 30 seconds has been chosen, hold down the function button (7) for
two seconds.
– To increase the exposure time to continuous exposure, when an
exposure time of 60 seconds has been chosen, hold down the function
button (7) for longer than two seconds.
Exposure time Distance
120 seconds 2 cm
120 seconds 2 cm
120 seconds 2 cm
13