Black & Decker JIS300 Manuel D'instructions page 5

Warning! Always check the rotary
sieve before use. If you detect any
cracks or damage, do not use the
appliance and contact the nearest service
centre or take the appliance to your dealer.
5. Fit the lid (B) by lowering it into position.
Press down firmly until it locks into
place. (the lid can only be removed by
sliding the release button (G) to the
unlock position)
6. Fit the juice jug (I). Push firmly until it
clicks into place.
7. Fit the ice shaving (J) by lowering it into
position.
8. Fit the ice shaver lid (K) and lock it into
position by turning it anti-clockwise.
Use
Juicing
1. Fully assemble the appliance (including
the ice shaver) the appliance will not run
unless both lids are securely locked in
position.
2. Place the appliance on a flat, stable
surface and connect it to the electrical
supply.
3. Select the juicing function by turning the
control knob (F) anti-clockwise.
4. Remove the pusher (A) and add the
ingredients, using the pusher to guide
the ingredients onto the blades.
- While you are preparing juice, you can
empty the pulp container by switching
the appliance o and carefully removing
the pulp container. Note: Reassemble the
empty pulp container before you
continue juicing.
All manuals and user guides at all-guides.com
5. When juicing is completed, return the
The appliance should be disconnected from
the mains supply before removing the jug.
The Juicer should not be run for longer than
2 Minutes. After each 2 Minutes use, the
Juicer should be allowed to cool for at least
2 minutes.
The appliance has a safety feature which
prevents overheating. If the device gets too
hot it will automatically shut o . The
appliance should be left for 15 minutes to
fully cool before re-starting.
Ice shaving
1. Fully assemble the appliance the
2. Place the appliance on a flat, stable
3. Put ice into the ice shaver (J) and fit the
4. Select the Ice shaver function by turning
5. When ice shaving is completed, return
The appliance should be disconnected from
the mains supply before removing the jug.
The appliance should not be run for longer
than 2 Minutes. After each 2 Minutes use,
the appliance should be allowed to cool for
at least 1 minute.
control knob (F) to the O (o ) position.
appliance will not run unless both lids are
securely locked in position.
surface and connect it to the electrical
supply.
ice shaver lid (K) securely.
the control knob (F) clockwise.
the control knob (F) to the O (o )
position.
ENGLISH
5