All manuals and user guides at all-guides.com
Installing the CPU fan and heatsink assembly
The Intel
®
Pentium
®
4/Intel
specially designed heatsink and fan assembly to ensure optimum thermal
condition and performance.
•
When you buy a boxed Intel
includes the CPU fan and heatsink assembly. If you buy a CPU
separately, make sure that you use only Intel
multi-directional heatsink and fan.
•
Your Intel
a push-pin design and requires no tool to install.
If you purchased a separate CPU heatsink and fan assembly, make sure
that a Thermal Interface Material is properly applied to the CPU heatsink
or CPU before you install the heatsink and fan assembly.
To install the CPU heatsink and fan:
1.
Place the heatsink on top of the
installed CPU, making sure that
the four fasteners match the
holes on the motherboard.
2.
Push down two fasteners at a
time in a diagonal sequence to
secure the heatsink and fan
assembly in place.
A
B
3.
When the fan and heatsink assembly is in place, connect the CPU fan
cable to the connector on the motherboard.
Do not forget to connect the CPU fan connector! Hardware monitoring
errors can occur if you fail to plug this connector.
®
Pentium
®
D LGA775 processor requires a
®
Pentium
®
®
Pentium
4 LGA775 heatsink and fan assembly comes in
B B B B B
B
A
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
®
4 processor, the package
®
-certified
A A A A A
B B B B B
A A A A A
1 1 1 1 1
1 1 1 1 1
7 7 7 7 7