Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Mounting and Start-up
Notes: The solar module serves as energy source for the solar
bamboo light. Direct sunlight that shines as long as possible is
required in order to charge the internal batteries. This way the
bamboo light can be powered with electricity in darkness.
Please keep in mind that foreign light sources may turn the lights off
temporarily. Therefore, do not place the solar bamboo light near
porch lights, wall lights, motion detectors, street lights etc.
Dispose of the packaging materials carefully or store them in a
1.
safe place. There is danger of suffocation for small children!
Twist the lamp head from the lamp
2.
body. Then turn the lamp shade
counter clockwise and remove it from
the lamp head.
Set the internal switch next to the
3.
battery compartment to the position
"ON" in order to switch on the bamboo
light. Re-assemble all parts in reverse
order.
Find a suitable location with direct
4.
sunlight.
Connect the individual parts of lamp pole and insert the ground
5.
stake vertically in the ground. Do not beat with a hammer or
similar on the ground stake. Put the lamp head on top of the pole.
Make sure that direct sunlight shines on the solar module for at
6.
least 8 hours a day in order to fully charge the built-in batteries.
At nightfall the solar bamboo light automatically lights up.
Set the internal switch of the solar bamboo light to "Off" in order
7.
to switch off the light when it is not used for a longer period of
time.
Using
7
Publicité
