When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
1. Read all instructions.
2. This appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they
are closely supervised and instructed concerning use of the
appliance by a person responsible for their safety.
3. Close supervision is necessary when any appliance is used by
or near children. Children should be supervised to ensure that
they do not play with the appliance.
4. Do not touch hot surfaces. Use handles or knobs.
5. To protect against risk of electrical shock, do not immerse
appliance, cord, or plug in water or other liquid.
6. Unplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and before
cleaning the appliance.
7. Do not operate any appliance with a damaged supply cord or
plug, or after the appliance malfunctions or has been dropped
or damaged in any manner. Supply cord replacement and
repairs must be conducted by the manufacturer, its service
agent, or similarly qualified persons in order to avoid a hazard.
Call the provided customer service number for information on
examination, repair, or adjustment.
2
All manuals and user guides at all-guides.com
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
8. Do not use outdoors.
9. The use of attachments not recommended or sold by the
appliance manufacturer for use with this model may cause
fire, electric shock, or injury.
10. Do not let cord hang over edge of table or counter or touch
hot surfaces, including stove.
11. Do not place on or near a hot gas or electric burner, or in a
heated oven.
12. Extreme caution must be used when moving an appliance
containing hot oil or other hot liquids.
13. Do not use appliance for other than intended purpose.
14. The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
15. To disconnect, turn temperature control dial to MIN, and
then remove plug from wall outlet.