Oreck 1600 Serie Guide D'utilisation page 11

All manuals and user guides at all-guides.com
Use
Using the Vacuum
1. Unwrap the cord around the bottom of the cord wrap area.
2. Plug the cord into the electrical socket.
3. Attach the tool you need for your cleaning job to the end of
4. Press the button on the extension wand for more length
5. Slide the power switch to the ON position.
6. Begin vacuuming.
4
After Using the Vacuum
7. Slide the power switch to the OFF position.
8. Unplug the power cord.
9. Wrap the cord around the cord wrap area and store.
Note: The Ultimate Handheld Vacuum has a MOTOR
PROTECTION SYSTEM: If fine materials such as soot,
cement, plaster dust, copy machine powder, etc. are picked up,
the bag surface may seal and cause the motor to shut off to
3
avoid overheating. If this happens, turn the switch off and
unplug the cleaner. If full, replace disposable inner bag. Check
and clear any clogs in hose or accessories. After approximately
thirty minutes the motor will have cooled and the cleaner will
be ready to use.
IMPORTANT: The cleaner must remain unplugged for thirty
minutes for motor to cool and system to reset.
11
the extension wand.
if needed.
5
1
2