Oreck 1600 Serie Guide D'utilisation page 14

1
14
All manuals and user guides at all-guides.com
Replacing the HEPA Filter
The HEPA filter should be replaced every six months, or more
often if the vacuum is used to pick up fine particles or in
extremely dirty areas.
To replace the HEPA door:
1. Push down on tab of the HEPA filter door.
2. Pull the door out of its slot.
3. Slide the HEPA filter up and out of the door.
4. Insert a new filter by aligning the slots on the side of the
filter with the tabs on the inside of the filter door.
5. Place the HEPA filter door assembly back into the slot and
rotate the door up until it snaps into place.
2
3