Publicité
STEP 19 - Unscrew the 3 pre-installed screws from the
trivet,and unscrew the 2 M4 screws from the SIDE BURNER
VALVE. Attached the SIDE BURNER VALVE and KNOB BEZEL
on the Side burner panel.
And attached the SIDE BURNER VALVE to the SIDE BURNER
ASSEMBLY. Note: Ensure the SIDE BURNER EJECTOR TUBE
should be aligned with the nozzle.Insert the ignition into
the ignitionneedle.
STEP 20 -
STEP 21 -
STEP 22 -
6
33
Publicité
