Publicité
Les langues disponibles
Les langues disponibles
Low Battery Indicator and Replacing Batteries
• If the Low Battery Indicator appears on the Display, it is
time to replace your battery. The thermometer takes one
3V lithium battery (CR2032).
• Open the battery door by lifting it using your finger and
remove the battery.
• Remove battery by using a pen tip or similar sized item to press the
metal tab upward toward the head of the thermometer. The battery will
pop up for easy removal.
• Insert a new CR2032 battery with + sign facing out. Push the battery
down until it snaps.
To protect the environment, dispose of empty batteries
at appropriate collection sites according to national or
local regulations.
Changing the Temperature Scale
Your thermometer is set at the factory to display Celsius (°C) temperature
measurements. If you wish to switch to Fahrenheit (°F)
and/or back from Fahrenheit to Celsius, follow the
following steps:
1) Press the Power Button to turn on the thermometer.
2) Open the Battery Door - use your finger to lift the battery
door open.
3) Find inside the battery compartment a small pin hole with letters
C/F nearby.
4) When the display is in the Ready state with <OK> displayed,
insert a paper clip wire into the hole and press once to switch
temperature display.
5) Follow the steps in the previous "How to Take a Temperature" section
of this manual.
8
Publicité
