Télécharger Imprimer la page

AquaScape DIY Backyard Pond Kit Mode D'emploi page 8

Masquer les pouces Voir aussi pour DIY Backyard Pond Kit:

Publicité

Les langues disponibles

Les langues disponibles

STEP 5
CONT...
EXCAVATE YOUR POND BASIN CONTINUED
Leveling the edges
• One of the most important parts of the excavation is
getting the perimeter of the pond level and setting the level
of the water. An excellent tool for this is a 2x4 set across
the pond. Set a 4-foot bubble level on the 2x4 to make
sure the perimeter of the pond is level. We recommend
using a transit or sight level on larger projects. Check your
progress several times while digging.
• It is typical to set the water level 2- 3" below the main
viewing area (patio, deck, etc.). This will bring the water
level of the pond up close to the edge of the pond without
going over the sides. (See Ex. 11)
2" to 3"
Ex. 11
• Rough out an excavated area for the MicroSkim
Simply dig a hole 18" wide by 21" long (the outline of the
skimmer) and 18" below the desired water level.
• Make sure the excavated
area under the MicroSkim
is compacted and level.
8
All manuals and user guides at all-guides.com
Viewing Area
(Patio, Deck or Lawn)
.
®
®
US 1-866-877-6637 |
• The skimmer should be excavated down to a depth so
that the proposed water level in the pond is approximately
¾" below the top of the opening of the skimmer.
(See Ex.12)
• Re-check all your measurements,
including length and width of pond,
plant shelf depth,
and overall pond depth.
STEP 6
INSTALL UNDERLAYMENT AND LINER
• Remove any sharp objects from the excavated basin that
may damage the liner.
• Unfold the underlayment fabric and place it into your
excavated pond basin. Starting from the bottom, remove
the slack from the underlayment, making sure it conforms
into all of the elevations.
• Now place the EPDM fish-safe liner on top of the
underlayment.
• The installation process is the same as the underlayment,
starting at the bottom and contouring the liner up and
out of the pond basin. (See Ex. 13 on next page)
• Try to get the large folds out, but the main goal is to make
sure that it's lying flat and going into all corners. Don't try
to get it perfect—you will hide the liner with rocks and
gravel later.
CAN 1-866-766-3426 | www.aquascapeinc.com
Ideal Water Level
3/4" Below
Soil Level on
1st Shelf
Front of Skimmer
Ex. 11

Publicité

loading

Produits Connexes pour AquaScape DIY Backyard Pond Kit

Ce manuel est également adapté pour:

997639976499765