AquaScape DIY Backyard Pond Kit Mode D'emploi page 13

STEP 13
CONT...
• Use the Pond & Waterfall Foam Sealant to fill in gaps
between the stones that water is flowing over. The foam
keeps the water flowing over the top of the waterfall
stones. Without the Pond & Waterfall Foam Sealant,
you will lose waterflow. The water will travel and get lost
beneath the rocks.
• Let dry for at least one hour before introducing water!
The MicroFalls is designed with a plastic lip for the
®
water to cascade off. You can use the plastic lip or
hide the lip using a piece(s) of thin (no more than
3/4" thick) natural slate. (See Ex.32) This stone can
be attached to the MicroFalls® using Aquascape
Black Waterfall Foam.
3/4"
Ex. 32 If using a natural rock for your waterfall lip,
make sure that it is fairly thin. (no more than
3/4")
☎
www.aquascapeinc.com |
All manuals and user guides at all-guides.com
☎
CAN 1-866-766-3426 |
STEP 14
BRING IN THE TOPSOIL
• Add topsoil to the berm and surrounding area in order to
provide a good substrate for future landscape planting.
STEP 15
BUILD THE RETAINING WALL
• Finish off the berm where the MicroFalls
building a small retaining wall out of boulders. This step
may or may not be needed, depending on the size of the
berm and the transition into the existing landscape.
US 1-866-877-6637
is buried by
®
13