Duramaxx 10027857 Manuel D'instructions page 7

Step 2: Installing the Tow Bar
In order to fix the tow bar push the round end into the receptacle provided (Figure 1) on the left-hand
side of the trailer. Secure the inserted tow bar with the quick-action tension jack supplied (Pos.a) and
the locking pin (Figure 2).
The bend in the tow bar is now facing the right with respect to the direction of travel.
Important: Ensure that the pin is securely locked, because a loose tow bar could result in your lo-
sing control of the trailer while riding.
Step 3: Unfolding the Trailer
With the trailer frame lying flat, raise the side panels so that they are vertical. Position the roll bar
into place until the holes in the side panels and the holes on the ends of roll bar are line up.
Insert the knob from outside of the side panel and then into the thread on the end of the roll bar.
7
All manuals and user guides at all-guides.com
Please proceed along the same lines on the opposi-
te side with the other wheel.
PLEASE NOTE: Ensure that the retaining washers
(a) are positioned in the recesses in the frame.