Dear Customer,
Congratulations on purchasing this product. Please read and follow these instructions, in order to avoid
damaging the item. We do not cover any damages that may arise from improper use of the item or the
disregard of the safety instructions.
•
Do not exceed the trailer 's permitted maximum weight of 40 kg.
•
The trailer must not be used to transport passengers.
•
Do not carry out technical modifications of any kind on the trailer.
•
Do not attempt to carry additional loads on the tow bar.
•
Maximum road speed: 10 mph (16 km/h)
•
Do not use the trailer on stony or uneven road surfaces, or in road conditions otherwise considered
dangerous.
•
Proceed with great care when on public roads in order to avoid hazards.
•
The person riding the towing bicycle must be at least 18 years of age and in a fit state to be in charge
of a vehicle.
•
Ensure that the towing bicycle is in a perfect state of repair.
•
Check all components for tightness before each trip, paying particular attention to the quick-action
coupling and wheels.
•
Please note that we cannot accept liability for accessories obtained from other suppliers.
•
Only bicycles must be used as towing vehicles. The cycle used must be specifically identified in its
manufacturer 's instructions as being suitable for towing purposes.
•
Ask your specialist dealer to check that the brakes are capable of towing the trailer.
•
Never load the trailer to above the top edge of the side rails, as falling objects may endanger other
traffic.
•
Load the trailer to its maximum capacity and practice towing it on an enclosed piece of land before
venturing out onto public roads. Take special care to practice riding around bends and up and down
slopes, and try out your emergency-braking and setting-off techniques on different road surfaces.
•
Note that there is an increased risk of tipping over when stationary when the trailer is attached
•
Ensure at all times that the towing bicycle is in a fit state to tow the loaded trailer.
•
Push the load well inside the trailer or otherwise secure it to prevent loss.
Step 1: Attaching the wheels
Remove the two black protective caps on each wheel.
Unscrew the parts marked" inside" in the picture from the quick-action tension jack and push the
quick-action tension jack together with the parts marked "outside" through the wheel axle.
Take one wheel and position it in the guide way provided in the frame in such a way as to ensure that
the quick-action tension jack lever is located on the outside of the trailer. Now, remount the parts
marked „inside" onto the quick-action tension jack, observing the sequence shown in the picture and
then tighten it.
All manuals and user guides at all-guides.com
Technical Data
Article no. 10027857
Maximum rated load 60kg
Speed limit 16kph
Maximum load volume 70 x 57,5 x 32 cm
Safety Instructions
Assembly
6