BTI BH 8-48 BOX Notice D'instructions Originale page 26

ENGLISH
Cleaning
WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing this procedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Optional Accessories
WARNING: Since accessories, other than those offered by
BTI, have not been tested with this product, use of such
accessories with this tool could be hazardous. To reduce
the risk of injury, only BTI recommended accessories
should be used with this product.
Various types of SDS MAX drill bits and chisels are available as
an option. Accessories and attachments used must be regularly
lubricated around the SDS MAX fitment.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.BTI.de.
26
All manuals and user guides at all-guides.com