BTI BH 8-48 BOX Notice D'instructions Originale page 20

ENGLISH
HEAVYDUTY ROTARY HAMMERDRILL
BTI BH 848 BOX, BH 1052 BOX
Congratulations!
You have chosen a BTI tool. Years of experience, thorough
product development and innovation make BTI one of the most
reliable partners for professional power tool users.
Technical Data
Voltage
(U.K. & Ireland only)
Type
No-load speed
No-load beats per minute
Power input
Single impact energy (EPTA 05/2009)
Maximum drilling range in steel/wood
Solid bits
Core bits
Tool holdler
Weight
Noise values and vibration values (triax vector sum) according to EN60745-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Drilling
Vibration emission value a
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
* Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
20
All manuals and user guides at all-guides.com
BHD-8-48 BHD-10-52
V 230
AC
V 230/115 230/115
AC
1
-1
min 177–355 145–290
bpm 1350–2705 1105–2210
W 1600
J 13.3
mm 48/80
mm 25–45
mm 40–150 40–125
SDS MAX SDS MAX
kg 8.5
dB(A) 98
dB(A) 109
dB(A) 3
= m/s² 9.6*
m/s² 1.5
= m/s² 9.0*
m/s² 1.5
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of
work patterns.
EC-Declaration of Conformity
230
Machinery Directive
1
Heavy-Duty Rotary Hammerdrill
1700
BTI BH 8-48 BOX, BH 10-52 BOX
19.4
BTI declares that these products described under Technical
52/80
Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
28–48
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact BTI at the
following address or refer to the back of the manual.
10.5
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of BTI.
100
111
3
Andreas Krebs
Managing Director
BTI Befestigungstechnik GmbH & Co.KG
Salzstraße 51
14.2*
74653 Ingelfingen
1.5
17. 01. 2018
WARNING: To reduce the risk of injury, read the
11.7*
instruction manual.
1.5
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
ppa. Martin Mayer-Hagelstein
Director Marketing & E-Commerce