Publicité
Step 10
Carefully stand your unit upright.
å
IMPORTANT: This unit must be positioned against a wall.
å
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice
å
in the ENDS (A and B). Set the ADJUSTABLE SHELVES (J) onto the METAL PINS.
We recommend using the SAFETY BRACKET (1G) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (1S) into
å
the top of the unit and a BLACK 1-7/8" FLAT HEAD SCREW (2S) into a stud in your wall.
Push a CAM COVER (13P) onto each visible HIDDEN CAM.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
J
B
J
50 lbs.
1R
(12 used)
2R
Page 14
No load
J
30 lbs.
30 lbs.
40 lbs.
A
30 lbs.
BLACK 1-7/8" FLAT HEAD SCREW
1G
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
(8 used)
To cover HIDDEN CAMS
418546
(1 used into a stud in your wall)
2S
1S
13P
www.sauder.com/services
Publicité
