Publicité
Les langues disponibles
Les langues disponibles
Installation (continued)
6
Attaching the quick connector
to the receiving block
□
Connect the hose with the yellow tag to the hose on the control box (H) with a matching yellow tag. Push
rmly together until they snap into place. As shown in the Fig 1.
□
Connect the hose with the green tag to the hose on the control box (H) with a matching green tag. Push
rmly together until they snap into place. As shown in the Fig 1.
□
OPTIONAL: If you want to use the faucet without the sensor feature or without power, you can attach the
quick connector (1) to the receiving block (2). This bypasses the sensor feature and enables the faucet
to work by operating the handle. As shown in the Fig 2.
All manuals and user guides at all-guides.com
Fig 1
Fig 2
Yellow
2
Yellow
H
Green
1
Green
2
1
7
Please contact 1-855-HD-GLACIER for further assistance.
HOMEDEPOT.COM
Publicité
