Publicité
Les langues disponibles
Les langues disponibles
Installation (continued)
9
Placing the battery pack into
the battery pack seat
NOTE: This step is for battery installation (optional). If the
batteries will not be used, skip to step 10. Before installation,
select the location for the battery pack seat (1) and verify
that the battery pack (I) will reach battery pack seat (1).
□
There are 2 options to secure the battery pack (I) under the counter: Tape Installation or Screw Installation.
□
Tape Installation: Attach one side of the double sided tape (2) to the battery pack seat (1). Firmly attach the
battery pack seat (1) to the cabinet wall. Place the battery pack (I) into the battery pack seat (1).
□
Screw Installation: Drill holes in the wall using a 6mm (15/64") diamater drill bit. Install the battery pack
seat (1) using the molly anchors (3) and screws (4) provided. Place the battery pack (I) into the battery
pack seat (1).
Tape Installation
1
2
All manuals and user guides at all-guides.com
I
1
Screw Installation
OR
1
10
3
4
1
3
Publicité
