DNT WT8 Notice D'utilisation page 37

All manuals and user guides at all-guides.com
Call-Ring tone
There are 8 different call-ring melodies available.
To change the call-ring melody proceed as follows:
Key lock
This function allows to lock the keypad, to avoid accidental unwanted
commands.
To enable the key lock function proceed as follows:
If the key lock function is activated, only the PTT
can be used. To disable the function proceed in
the same way.
Press the Call button to transmit a call-ring tone to
recall the attention of your correspondent.
1. Press the Up-/Down button until
on the display.
2. Press the On/Off button to confi rm. The display
shows the current used call-ring melody no.
3. Use the Up-/Down button to select between the 8
call-ring melodies.
4. Press the On/Off button to confi rm.
1. Press the On/Off button and hold it pressed.
2. Press the Up button until the key icon appears on
the display.
3. Release both buttons.
- 37 -
General operation
appears