DNT WT8 Notice D'utilisation page 31

All manuals and user guides at all-guides.com
Turn the radio on
Turn the radio off
To switch the radio off, press the On/Off button for a few seconds, until
display is empty.
Don't touch the antenna during transmission, to
avoid malfunction of the radio.
Transmitting
VOX / Baby monitor (HANDS-FREE OPERATION)
VOX allows to switch automatically between transmitting and receiving by
voice operation. The radio transmits while speaking into the microphone
without pressing the PTT button and automatically returns to reception
when the operator stops speaking.
When the transmitting starts, a beep tone is heard, at the
end of transmission two beeps are heard.
To switch the radio on, press the On/Off button for a
few seconds, until the LC display shows all icons and
a tone is heard. After half a second the display changes
to normal mode. At normal mode the channel no., sub
code and the battery condition is seen.
To transmit, press and hold the PTT (PUSH-TO-TALK)
button and speak with a normal voice at about 5 cm
away from the microphone. The
on while transmitting. Release the PTT button at the
end of transmission.
- 31 -
General operation
transmitter icon is