DNT WT8 Notice D'utilisation page 33

All manuals and user guides at all-guides.com
Receiving
Volume control
The Volume can be adjusted in 8 steps.
To change the volume proceed as follows:
Frequency band (only WT77)
The WT77 can work alternatively in LPD band (433 MHz 69 channels)
and in the PMR band (446 MHz 8 channels).
To change the band proceed as follows:
5. Use the Up-/Down button to select between 4
levels.
6. Press the On/Off button to confi rm.
If the radio detects a valid signal in the selected chan-
nel, the receiving indicator appears, but the speaker
is only activated when the CTCSS code matches or is
switched off.
1. Press the Volume button for a short time, the dis-
play shows the current volume level.
2. Use the Up-/Down button to change the volume.
3. Press the On/Off button to confi rm.
1. Press the Up-/Down until
display.
2. Press the On/Off button to confi rm.
3. Use the Up-/Down button to move the arrow to
.
4. Press the On/Off button to confi rm.
- 33 -
General operation
appears on the