TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
• Tune to a station by press the
is shown on the display.
To tune to a preset station:
• To tune to the next preset station, press the 10/M./FOLD.+ button.
• To tune to the previous preset, press the 10/M./FOLD.- button.
AUTO PRESET MEMORY / SCAN
To scan for stations within reception range and save them to preset memory automatically,
press and hold the PLAY/PAUSE/PAIR/SCAN button. After the unit is nished scanning, the
unit will automatically tune to preset number 1 (P01).
MANUAL PRESET MEMORY OPERATION
Choose which stations to save in preset memory instead of scanning automatically.
1. Use the
/TUN + or
(e.g., 93.1).
2. Press the P-MODE/M. button. "P01" will ash on the display to indicate that you are saving
the station as Preset Memory 01. (To change the preset memory number, press the 10/M./
FOLD.+ or 10/M./FOLD.- buttons.)
3. Press the P-MODE/M. button to nish saving the station (e.g., P01 is now set to 93.1).
4. To save another station, repeat steps 1 to 3. You may save up to 30 FM stations.
USB OPERATION
This unit provides two USB ports for music playback.
1. Press the FUNCTION button on unit to select "USB1" or "USB2" mode.
2. Plug the USB memory stick to the USB port on top of the unit (The unit can support up to 32G
USB device). Playback will start automatically from Track 1.
3. To pause playback, press the PLAY/PAUSE/PAIR/SCAN button on unit. The playing time will
ash on the display.
4. To resume playback, press the PLAY/PAUSE/PAIR/SCAN button again.
5. To select a desired track, press the
desired track appears on the display. The unit will start play automatically.
6. To search for a particular passage during playback, press and hold the
to scan the current playing track at high speed until desired point (passage) appears, then
release the button for normal playback mode.
7. To select a song which track number exceeds 10, press the 10/M./FOLD.+ or 10/M./FOLD.-
button each time to skip forward/backward 10 tracks, then press the
select desired track.
8. To select a desired folder (if the USB contains more than one folder), press and hold the
10/M./FOLD.+ or 10/M./FOLD.- button each time to skip forward/backward a folder, then
press the
or
Important: The USB port is intended for data transfer only, other devices cannot be used with
this USB connection. The use of USB extension cords is not recommended. Don't plug the USB
from the unit when playing or reading the USB device.
All manuals and user guides at all-guides.com
/TUN + or
/TUN - button to tune to the station that you want to save as a preset
button to select desired track.
EN
/TUN - button repeatedly. The station frequency
or
button respectively during playing until the
15
or
button
or
button to