Publicité
Les langues disponibles
Les langues disponibles
Short description of the mainboard
Installing/removing or replacing processor
(with heat sink)
Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.
Technical data
•
AMD Athlon 64, Athlon 64 X2 and AMD Sempron with up to 1 GHz Front Side
Bus (Hypertransport) in AM2 design (mPGA 940)
•
A current list of the processors supported by this mainboard is available on the
Internet at: "www.fujitsu-siemens.com/mainboards".
Procedure
3
1
► Remove the fan (if present) and the heat sink.
► Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).
► Fold up the frame.
► Remove the old processor from the slot (3).
The angled corner of the processor can also be located in a different
position than the one shown in the illustration.
► Insert the new processor in the socket so that the angled corner of the processor matches
the coding on the socket (A) with regard to the position (4).
9
All manuals and user guides at all-guides.com
2
4
5
A
edition 1
Publicité
