Panasonic JS-960WP Serie Mode D'emploi page 34

Fingerprint Sensor Kit Installation
Be sure to disconnect the power cable of the main block (POS Workstation) and
confirm the power is "OFF" before the operation below.
*Make sure to ground the unit before starting this work.
Fingerprint Sensor Kit (JS-960FPK010) contents
Fingerprint unit x 1
(1) Follow the steps for "MSR Unit (Short Type) Installation" in reverse, and remove the
MSR unit from the display unit.
(2) Remove the screws (2 locations).
(1)
34
JS-960WP.indb 34
Bottom case x 1
(2)
Screws
Cable x 1
2012/02/15 15:20:11