Panasonic JS-960WP Serie Mode D'emploi page 33

(4) Connect the cable to the display unit and arrange the cable properly.
p Arrange the cable inside the display unit cable guide.
(5) Align the two screw holes of the MSR unit with the screw holes where the protective
cover was removed, and fix the MSR unit with the two screws.
(6) Attach the MSR connector cover.
(7) Remove the 2 screws and detach the cable guide cover.
(8) Follow steps (5) to (7) of "Display Unit Replacement" to attach the display unit with the
installed MSR unit.
(4)
(6)
JS-960WP.indb 33
(5)-1
(7)-1
(5)-2
(7)-2
Cable guide cover
2012/02/15
33
15:20:08