Panasonic JS-960WP Serie Mode D'emploi page 31

(4) Connect the cable to the display unit and arrange the cable properly.
p Arrange the cable inside the display unit cable guide.
(5) Align the two screw holes of the MSR unit with the screw holes where the protective
cover was removed, and fix the MSR unit with the two large screws.
(6) Align the protrusions of the joint with the screw holes of the MSR unit, and fix the joint
to the display unit using the two small screws.
(7) Attach the MSR connector cover.
(8) Remove the 2 screws and detach the cable guide cover.
(9) Follow steps (5) to (7) of "Display Unit Replacement" to attach the display unit with the
installed MSR unit.
(4)
(6)
(8)-2
Cable guide cover
JS-960WP.indb 31
(5)-1
(7)
Joint
(5)-2
(8)-1
2012/02/15
31
15:20:00