Panasonic JS-960WP Serie Mode D'emploi page 28

Rear Display Unit Installation
Be sure to disconnect the power cable of the main block (POS Workstation) and
confirm the power is "OFF" before the operation below.
Rear display unit (JS-960RD-020) contents
Rear display x 1
(1) While pushing in the cable cover release button, slide the cable cover with both hands
to remove it.
(2) Remove the three screws on the rear of the cable cover and separate it into the cable
protector and the hinge protector.
(3) Slide the plate and attach it to the rear display using the two thumbscrews.
(1)
Cable cover
release button
(3)-1
28
JS-960WP.indb 28
Plate x 1
(2)-1
Screws
(3)-2
Screw x 4
(2)-2
2012/02/15 15:19:50